. Polaris 400 USER'S MANUAL M/B For Socket-A Athlon/Duron Processor NO.
G03-V400MAX1A Release date: October 2002 Trademark: Specifications and Information contained in this documentation are furnished for information use only, and are subject to change at any time without notice, and should not be construed as a commitment by manufacturer. TABLE OF CONTENT USER’S NOTICE. 1 MANUAL REVISION INFORMATION.1 COOLING SOLUTIONS.1 CHAPTER 1 INTRODUCTION OF Polaris 400 MOTHERBOARD FEATURE OF MOTHERBOARD.2 SPECIFICATION.3 PERFORMANCE LIST.4 LAYOUT DIAGRAM & JUMPER SETTING.5 CHAPTER 2 HARDWARE INSTALLATION HARDWARE INSTALLATION STEPS. USER’S NOTICE COPYRIGHT OF THIS MANUAL BELONGS TO MANUFACTURER. NO PART OF THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF MANUFACTURER. Chapter 1 Introduction of Polaris 400 Motherboard 1-1 Feature of motherboard The Polaris 400 motherboard is design for use AMD Athlon/Duron/Athlon XP 200MHz /266MHz/333MHz (Double Data Rate) Front Side Bus Frequency CPU, which utilize the Socket-A design and the memory size expandable to 3.0GB. This motherboard use the newest VIA KT400 chipset, whose 133MHz/266MHz /333MHz (Double Data Rate) Front Side Bus frequency and 400MHz memory interface delivers a clear upgrade path to the future generation of 266MHz/333MHz processors and DDR266.
1-2 Specification Spec Description ∗ ATX form factor 4 layers PCB size: 30.5x24.5cm Design ∗ VIA KT400/VT8235 Chipset Chipset ∗ Support AMD Athlon 1.1GHz∼1.4GHz processor CPU Socket ∗ Support AMD Duron 900MHz∼1.3GHz processor ∗ Support AMD Athlon XP1500+XP2700+ processor ∗ Support 200MHz/266MHz/333MHz (Double Data Rate) Front Side Bus frequency processors ∗. 1-3 Performance List The following performance data list is the testing result of some popular benchmark testing programs.
![]()
These data are just referred by users, and there is no responsibility for different testing data values gotten by users (the different Hardware & Software configuration will result in different benchmark testing results.) Performance Test Report CPU. Hoyle card games download for windows 10. 1-4 Layout Diagram & Jumper Setting PRINT GAME/MIDI PORT PS/2 Mouse PS/2 Keyboard COM1 COM2 LINE-IN LINE-OUT K/B Power ON Jumper (JP1) CPU Socket PS2 KB/Mouse Port CPU FAN USB Port /LAN Connector DDR DIMM X3 PC99 Back Panel VIA KT400 Chip ATA 100 IDE Conn. Jumper Name Description Page Keyboard Power On Enable/Disabled 3-pin Block USB Wake-Up Enable/Disabled 3-pin Block CPU Front Side Bus Frequency 4-pin Block Keyboard Password Clear jumper 3-pin Block JBAT CMOS RAM Clear jumper 3-pin Block Connectors Connector Name Description Page ATXPOW ATX Power Connector 20-pin Block.
Hardware installation 2-1 Hardware installation Steps Before using your computer, you had better complete the following steps: 1. Check motherboard setting 2. Install CPU 3. Install Memory 4. Install Expansion cards 5. Connect Ribbon cables, Panel wires, and power supply 6. 1-2 closed Normal 2-3 closed Keyboard Password Clear Keyboard Password Clear Jumper Setting CMOS RAM Clear (3-pin): JBAT A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2 pins of JBAT to store the CMOS data.
To clear the CMOS, follow the procedure below: Turn off the system and unplug the AC power Remove ATX power cable from ATX power connector. Serial Port - a low speed interface typically used for mouse and external modems. Parallel Port - a low speed interface typically used for printers. PS/2 - a low speed interface used for mouse and keyboards. USB - Universal Serial Bus - a medium speed interface typically used for mouse, keyboards, scanners, and some digital cameras. Socket-A Colden Arrow CPU ZIF Socket-A When you put the CPU into the ZIF socket. No force require to insert of the CPU, then press the level to Locate position slightly without any extra force.
2-4 Install Memory This motherboard provides three 184-pin DUAL INLINE MEMORY MODULES (DIMM) sites for memory expansion available from minimum memory size of 64MB to maximum memory size of 3.0GB DDR SDRAM. For the DDR SDRAM CLOCK is set at 166MHz, use only DDR333 compliant DDR Modules. When this motherboard operate at 133Mhz, most system will not even boot if non-compliant modules are used because of the strict timing issues, if your DDR Modules are not DDR266-compliant, set the DDR SDRAM clock to 100MHz to ensure system stability. Interrupt request are shared as shown the table below: INT A INT B INT C INT D PCI slot 1 Shared PCI slot 2 Shared PCI slot 3 Shared . ROW2 ROW1 3.3V 3.3V -12V 3.3V Soft Power On Power OK +5V (for Soft Logic) +12V Pin 1 PS/2 Mouse & PS/2 Keyboard Connector: J1(KB/MS) The connectors for PS/2 keyboard and PS/2 Mouse. USB Port connector: USB The connectors are 4-pin connector that connect USB devices to the system board. LAN Port connector: LAN The connector is standard RJ45 connector for network connection Parallel Port Connector (25-pin female): PARALL.
Pin 1 Floppy Drive Connector Primary IDE Connector (40-pin block): IDE1 This connector supports the provided IDE hard disk ribbon cable. After connecting the single plug end to motherboard, connect the two plugs at other end to your hard disk(s). If you install two hard disks, you must configure the second drive to Slave mode by setting its jumpers accordingly. This connector support the provided Serial ATA IDE cable for connect the Serial ATA hard disk. Pin 1 SATA2 SATA1 Serial-ATA Port Connector 2-6-2 Headers Line-Out, MIC Header (9-pin): AUDIO This header connect to Front Panel Line-out, MIC connector with cable.
AUDIO AUD - FPO UT - L AUD - RET - L. 1394 Port Headers (9-pin): 1394A, 1394B 1394A 1394B Pin 1 Pin 1 1394 Port Headers IDE Activity LED: HD LED This connector connects to the hard disk activity indicator light on the case. Reset switch lead: RESET This 2-pin connector connects to the case-mounted reset switch for rebooting your computer without having to turn off your power switch. (10) FAN Speed Headers (3-pin): FAN1, FAN2, CPUFAN These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the fan manufacturer, the wire and plug may be different. The red wire should be positive, while the black should be ground. Connect the fan’s plug to the board taking into consideration the polarity of connector.
2-7 Starting Up Your Computer 1. After all connection are made, close your computer case cover. Be sure all the switch are off, and check that the power supply input voltage is set to proper position, usually in-put voltage is 220V∼240V or 110V∼120V depending on your country’s voltage used. Chapter 3 Introducing BIOS The BIOS is a program located on a Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gain control.
The BIOS first operates an auto-diagnostic test called POST (power on self test) for all the necessary hardware, it detects the entire hardware device and configures the parameters of the hardware synchronization. 3-3 The Main Menu Once you enter Award BIOS CMOS Setup Utility, the Main Menu (Figure 3-1) will appear on the screen. The Main Menu allows you to select from fourteen setup functions and two exit choices. Use arrow keys to select among the items and press to accept or enter the sub-menu. Load Optimized Defaults Use this menu to load the BIOS default values that are factory settings for optimal performances system operations. Load Standard Defaults Use this menu to load the BIOS default values for the minimal/stable performance system operation. Set Supervisor/User Password Use this menu to set User and Supervisor Passwords.
The time format is. Primary Master/Primary Slave Secondary Master/Secondary Slave Press PgUp/ or PgDn/ to select Manual, None, Auto type. Note that the specifications of your drive must match with the drive table.
The hard disk will not work properly if you enter improper information for this category. Allows you to choose the VIRUS Warning feature for IDE Hard Disk boot sector protection. If this function is enabled and someone attempt to write data into this area, BIOS will show a warning message on screen and alarm beep. Disabled (default) No warning message to appear when anything attempts to access the boot sector or hard disk partition table. Sets the number of times a second to repeat a keystroke when you hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, and 30. Typematic Delay (Msec) Sets the delay time after the key is held down before is begins to repeat the keystroke.
The settings are 250, 500, 750, and 1000. Selecting Enabled allows caching of the system BIOS ROM at F0000h-FFFFFh, resulting in better system performance. However, if any program writes to this memory area, a system error may result.
The settings are: Enabled and Disabled. Video RAM Cacheable Select Enabled allows caching of the video BIOS, resulting in better system performance. However, if any program writes to this memory area, a system error may result. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software AGP Timing Settings AGP Transfer Aperture Size Item Help AGP Transfer Mode Auto AGP Driving Control Auto AGP Driving Value Menu Level AGP Fast Write Disabled AGP Master 1 WS Write Enabled AGP Master 1 WS Read Enabled.
CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Integrated Peripherals OnChip IDE Function Press Enter Item Help OnChip Device Function Press Enter Onboard Super IO Function Press Enter Init Display First PCI Slot Menu Level ↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Optimized Defaults. The integrated peripheral controller contains an IDE interface with support for two IDE channels.
Select Enabled to activate each channel separately. The settings are: Enabled and Disabled. Primary/Secondary Master/Slave PIO The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of the four IDE devices that the onboard IDE interface supports. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Onboard Super IO Function Onboard FDD Controller Enabled Item Help Onboard Serial Port 1 3F8/IRQ4 Onboard Serial Port 2 2F8/IRQ3 UART2 Mode Normal Menu Level RxD, TxD Active Hi, Lo IR Duplex Mode Half Use IR Pins IRRX/IRTX.
The Power Management Setup allows you to configure your system to most effectively save energy saving while operating in a manner consistent with your own style of computer use. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Power Management Setup ACPI Function Enabled Item Help. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Wake Up Events Item Help LPT & COM LPT/COM HDD & FDD PCI Master Menu Level Wake-Up on LAN/Ring Disabled Wake-Up on PCI PME Disabled Wake-Up On Hot Key (PS2 KB) Disabled RTC Alarm Resume Disabled. This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software IRQ Resources IRQ3 assigned to PCI Device Item Help IRQ4 assigned to PCI Device IRQ5 assigned to PCI Device IRQ7 assigned to PCI Device Menu Level IRQ9 assigned to PCI Device IRQ10 assigned to PCI Device.
This section is for setting CPU Frequency/Voltage Control. CMOS Setup Utility – Copyright(C) 1984-2002 Award Software Miscellaneous Control Auto Detect DIMM/PCI Clk Enabled Item Help Spread Spectrum Disabled.
Current Host Clock is Host Clock at Next Boot is 100MHz Menu Level. Load Standard Defaults When you press on this item, you get confirmation dialog box with a message similar Load Standard Defaults (Y/N)? N Pressing loads the BIOS default values for the most stable, minimal-performance system operations. Load Optimized Defaults When you press.
Check your package and there is A MAGIC INSTALL CD included. This CD consists of all DRIVERS you need and some free application programs and utility programs. In addition, this CD also include an auto detect software which can tell you which hardware is installed, and which DRIVERS needed so that your system can function properly.
AGPVXD: VIA AGPVXD DRIVER IS TO BE INSTALLED, IF YOU ARE USING AN AGP VGA CARD, VIAGART.VXD WILL PROVIDE SERVICE ROUTINES TO YOUR VGA DRIVER AND INTERFACE DIRECTLY TO HARDWARE, PROVIDING FAST GRAPHIC ACCESS IRQ ROUTING: VIA PCI IRQ MINIPORT DRIVER IS TO BE INSTALLED UNDER WIN98 ONLY, IT WILL FIX PCI IRQ ROUTING SEQUENCE INF: VIA REGISTRY DRIVER IS TO BE INSTALLED UNDER WINDOWS. Click NEXT to Install ATAPI Vender 6. Click NEXT to choose enabled DMA Mode Support Driver 7. Click NEXT to Install VIA AGP VXD Driver 8. Click NEXT to Install VIA IRQ Routing Mini port Driver 9. Click Finish to restart computer 4-2 SOUND Install CMI8738/C3DX PCI Audio Driver 1.
Choose Setup Language and Click OK 4. Click Next when copyright Issue appears, click Next or choose BROWSE to change the path for the file to be store 5. Enter Program folders name or click Next 6. OS can Auto Find C-Media CMI8738/C3DX PCI Audio Device 7. Select C-Media Mixer Advanced Speakers, 12. Enable USING Xear 3D, you can select 4/6 this is C-Media Audio speaker Configuration Speakers Xear Function setting. (S/PDIF only support 2 CH speaker output) 13.
Select C-Media Mixer Advanced volume, this 14. Select C-Media Mixer Advanced Sound is 6CH speaker volume Setting Effect. 4-4 SATA Install Promise ATA IDE Controller Driver 1. Click SATA in MAGIC INSTALL MENU 2. Install PROMISE SERIAL ATA Controller Driver 3. Click Yes to Restart your computer after Driver Install Finish The path of the file: For Windows 9X is X: SATA375 WIN98-ME (including Win95/98/ME) For Windows NT4.0 is X: SATA375 NT4 For Windows 2000 is X: SATA375 WIN2000 For Windows XP is X: SATA375 WINXP.
appears Setup Window appears 3. Click the Button to start installation 4. Select Program Group name or enter a new group name, click continue to setup and click OK after setup complete 4-5-1 How To Utilize PC-HEALTH Click Program → Winbond Hardware Doctor 2.
After finish Setup you will have a Magic Double click the Magic BIOS icon you will BIOS icon in your screen have this picture, choose from internet you can upgrade BIOS On-line When On-line update BIOS the program Click Next if you need update BIOS, after will auto-check your BIOS version upgrade BIOS, the system will clear CMOS and automatically restart. 4-7 PC-CILLIN Install PC-CILLIN 2002 Anti-virus program 1. Click PC-CILLIN when MAGIC INSTALL 2. (1) Click 'Install PC-CILLIN' when PC- MENU appear CILLIN 2002 main menu appears, and Click NEXT when 'Install Shield Wizard For PC- CILLIN 2002' (2) Click Open Manual. You can learn PC- CILLIN 2002 how to use 3. After PC-CILLIN 2002 complete, Please 8.
Finish register process, we recommend select register your information and get LICENSE update item ro download newest engine code KEY from TREND MICRO web site, enter and virus code your license key and click FINISH Note: Please install ACROBAT READER, Before you read PC-CILLIN 2002 User Manual, the path at X: acrobat ar500eng.exe. Check device working properly in Device Manager The Path of the file is X: VIA VIAUSB20 SETUP.EXE 4-9 HOW TO UPDATE BIOS Before update BIOS please choose Disabled in “Flash Part Write Protect” item on “Miscellaneous Control” in BIOS Setup, please refer page Method 1.
Manuals can be very handy if someone needs to change a BIOS setting, or do other important computer-related tasks like upgrading. Here are download locations for motherboard manuals from popular manufacturers: Asus Asus motherboard manuals may be downloaded from. ASUS offers three ways of finding downloads for your specific motherboard. You can search by the model name or serial product number (third option below the main search area). You also have an option to use their software to automatically detect the motherboard on the computer you are using (first option), or you can select the product manually (middle option). Once you reach the download page for your motherboard click on the “Manual” link to see a list of manuals to download. DFI (Diamond Flower) DFI motherboard manuals are available for download from.
Select the type of your motherboard (such as ATX) and you should be provided with a list of models along with download links for manuals, drivers etc. Gigabyte Gigabyte motherboard manuals are available for download from. You can use the provided drop down menus or a search box to find your motherboard, and then click on the “Manual” link to list available manuals for download. Intel Intel motherboard manuals are available from. Select Desktop Boards as product family, then the chipset corresponding to your motherboard as product line, and then the name and model of your motherboard as product name.
After that you should be able to select “Documentation” as the download type. You don’t have to choose your operating system for that. After selecting Documentation you should get a list manuals that can be downloaded. SuperMicro SuperMicro motherboard manuals are available online. Select Motherboard as the Category, and your processor type as the Product Type, and then click “Submit Request” to get a list of available manuals. AOpen Manuals for AOpen motherboards can be downloaded from. Select Motherboards among products, and then the model of your motherboard to get a list of downloads, including manuals or guides.
ASRock Download manuals for ASRock motherboards at where you can use the search utility to find your motherboard and downloads available for it. Once you get your results it is important to click on “Manuals” on the right sidebar to display manuals for download instead of drivers and utilities. Biostar If you have a Biostar motherboard get manuals from the. Choose your model under “Motherboards”, then select the “Manual” tab on the page that appears. ECS (Elitegroup Computer Systems) You can download manuals for ECS motherboards from the.
Look to the Manuals section and choose your model. Otherwise you can use the search box. MSI Manuals for MSI motherboards can be found on the. You can use one of the two provided options to find your motherboard; search directly or use the download filter which allows you to drill down to the exact model and then select “manual” to get a list of downloadable manuals.
EVGA Manuals for motherboards made by EVGA can be found on the. Sapphire Find manuals for Sapphire motherboards at SapphireTech.com download site. Select Mainboard, then interface, series, and finally the name of the board, and click Submit. Selecting the operating system isn’t needed for manuals.
Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec: - Setup Driver/Application at first time: - Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the Cancel button if Windows detect the PCI Multimedia Audio device. Insert the 'Realtek AC'97 Drivers & Applications' CD into the CD-ROM drive and run the setup.exe program to finish the installation. Click on Next/OK/Go to continue the procedure. If the Windows popup 'Digital Signature Not Found' message, press Yes to continue the installation.
Finally, select to restart the system and press Finish to complete the installation. The system will reload the drivers and do some adjustments in the INF file if so required. Setup for Manual - 1. Double-click the 'System' icon to open the 'System Properties' dialog from Control Panel. Choose 'Hardware' tab and click the 'Device Manager' button. Please right-click mouse on 'MultiMedia Audio Controller' and choose the 'Properties' menu item to show the driver details.
Click the 'Driver' tab and then click the 'Update Driver.' Button for update. Please follow the instructions of the 'Upgrade Device Driver Wizard'.
Choose 'Search for a suitable driver for my device' and click the 'Next' button. Please specify the driver location/source and then click the 'Next' button in this case, 'Specify a location' has been chosen. If 'Specify driver location' is chosen, the Wizard will ask for the path where the driver is located. Click the 'Next' button to install Audio Driver on 'Driver Files Search Results'. If the 'Digital Signature Not Found' dialog is opened, click the 'Yes' button to continue the Installation.
After completing the above steps, the drier has been installed into the system. Please click 'Finish' button to complete the installation. Update Driver/Application: - Step 1. Follow Step 2,3,4 described in Setup at first time above to complete the procedure. Remove Driver/Application: - Step 1. Go to Start Settings Control Panel.
Select Add/Remove Programs icon. Select 'Realtek AC'97 Audio' and press Change/Remove button. Click on Next/OK/Go to finish the uninstallation. At the end of the procedure, select to restart the system and press Finish to complete the uninstallation.
. Preface Copyright This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author.
Version 3.0 Disclaimer The information in this document is subject to change without notice. Declaration of Conformity This device complies with part 15 of the FCC rules. Operation is subject to the following conditions:.
This device may not cause harmful interference, and. This device must accept any interference received, including interference that may cause undesired operation Canadian Department of Communications This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. T T T T T ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS ABLE OF CONTENTS Preface Chapter 1 Introducing the Motherboard Introduction.1 Feature.2 Motherboard Components.4 Chapter 2 7 7 7 7 7 Installing the Motherboard Safety Precautions.7 Choosing a Computer Case.7 Installing the Motherboard in a Case.7. Integrated Peripherals.33 Power Management Setup.36 PNP/PCI Configurations.39 PC Health Status.40 Frequency/Voltage Control.41 Load Fail-Safe Defaults.42 Load Optimized Defaults.42 Set Password.42 Save & Exit Setup Option.43 Exit Without Saving.43 Chapter 4 45 45 45 45 Using the Motherboard Software About the Software CD-ROM.45 Auto-installing under Windows 98/ME/2000/XP.45 Running Setup.46 Manual Installation.48.
Chapter 1 Introducing the Motherboard Introduction Thank you for choosing the KM400-M2 motherboard. This motherboard is a high perfor- mance, enhanced function motherboard that supports Socket 462 AMD processors with a 333/266/200MHz CPU front side bus. The motherboard incorporates the VIA KM400 Northbridge (NB) and VT8237 Southbridge (SB) chipsets. Feature Processor The motherboard uses a 462-pin socket that carries the following features:. Accommodates AMD K7 CPUs. Supports a system bus (FSB) of 333/266/200MHz Chipset The KM400 Northbridge (NB) and VT8237 Southbridge (SB) chipset are based on an innovative and scalable architecture with proven reliability and performance. Expansion Options The motherboard comes with the following expansion options:.
One AGP 3.0 compliant slot with 8X/4X(supports 1.5V interface only) speed. Three 32-bit PCI v2.2 compliant slots. Two 40-pin IDE low profile headers that support four IDE devices. Motherboard Components Introducing the Motherboard.
Table of Motherboard Components LABEL COMPONENT 1 CPU Socket Socket-A for AMD K7 CPUs 2 CPUFAN1 CPU cooling fan connector 3 DIMM1DIMM2 184-pin DDR SDRAM slots 4 JP3 BIOS flash protect jumper 5 JP8JP9 CPU Frequency jumper 6 FDD1 Floppy disk drive connector 7 IDE2 Secondary IDE connector 8 IDE1. Memo Introducing the Motherboard. Make sure that your case supports all the features required. Secondly, KM400-M2 supports one or two floppy diskette drives and four enhanced IDE drives.
Make sure that your case has sufficient power and space for all drives that you intend to install. Do not over-tighten the screws as this can stress the motherboard.
Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Setting Jumpers Use the motherboard jumpers to set system configuration options.
Jumpers with more than one pin are numbered. Checking Jumper Settings The following illustration shows the location of the motherboard jumpers. Pin 1 is labeled. Jumper Settings Jumper Type Description Setting (default) 1-2: NORMAL 3-pin CLEAR CMOS 2-3: CLEAR Before clearing the CMOS, make sure to turn the system off. 1-2: ENABLE 3-pin BIOS FLASH.
Connecting Case Components After you have installed the motherboard into a case, you can begin con- necting the motherboard components. Refer to the following: Connect the CPU cooling fan cable to CPUFAN1.
Connect the case cooling fan connector to CASFAN1. Connect the case switches and indicator LEDs to the PANEL1. ACPI LED function S4/S5 Light Blinking Blinking Dark ATX1: ATX 20-pin Power Connector Signal Name Signal Name +3.3V +3.3V +3.3V -12V Ground Ground PS ON# Ground Ground Ground Ground Ground PWRGD +5VSB +12V Front Panel Header The front panel header (PANEL1) provides a standard set of switch and LED headers commonly found on ATX or Micro ATX cases.
Hard Drive Activity LED Connecting pins 1 and 3 to a front panel mounted LED provides visual indication that data is being read from or written to the hard drive. For the LED to function properly, an IDE drive should be connected to the onboard IDE interface. The LED will also show activity for devices connected to the SCSI (hard drive activity LED) connector.
Warning: Over-clocking components can adversely affect the reliability of the system and introduce errors into your system. Over-clocking can permanently damage the motherboard by generating excess heat in components that are run beyond the rated limits. This motherboard has a Socket-462 socket. When choosing a processor, consider the performance requirements of the system.
Installing Memory Modules This motherboard accommodates two 184-pin 2.5V unbuffered Double Data Rate (DDR)SDRAM (Synchronous Dynamic Random Access Memory) memory modules. It can support DDR333/266/200 (PC2700/PC2100/PC1600 Double-Data-Rate DRAM) memory modules. The total memory capacity is 2GB.
DDR SDRAM memory module table Memory module Memory Bus DDR200. Installing a Hard Disk Drive/CD-ROM/SATA Hard Drive This section describes how to install IDE devices such as a hard disk drive and a CD-ROM drive.
About IDE Devices Your motherboard has a primary and secondary IDE channel interface (IDE1 and IDE2). An IDE ribbon cable supporting two IDE devices is bundled with the motherboard. About SATA Connectors Your motherboard features two SATA connectors supporting a total of two drives. SATA refers to Serial ATA (Advanced Technology Attachment) is the standard interface for the IDE hard drives which are currently used in most PCs.
These connectors are well designed and will only fit in one orientation. Installing a Floppy Diskette Drive The motherboard has a floppy diskette drive (FDD1) interface and ships with a diskette drive ribbon cable that supports one or two floppy diskette drives.
You can install a 5.25- inch drive and a 3.5-inch drive with various capacities. The floppy diskette drive cable has one type of connector for a 5.25-inch drive and another type of connector for a 3.5-inch drive.
Installing Add-on Cards The slots on this motherboard are designed to hold expansion cards and connect them to the system bus. Expansion slots are a means of adding or enhancing the motherboard’s features and capabilities.
With these efficient facilities, you can increase the motherboard’s capabili- ties by adding hardware that performs tasks that are not part of the basic system. Follow these instructions to install an add-on card: Remove a blanking plate from the system case corresponding to the slot you are going to use. Install the edge connector of the add-on card into the expansion slot. Ensure that the edge connector is correctly seated in the slot.
Secure the metal bracket of the card to the system case with a screw. SATA1/SATA2: Serial ATA connectors These connectors are use to support the new Serial ATA devices for the highest date transfer rates (150 MB/s), simpler disk drive cabling and easier PC assembly. It eliminates limitations of the current Parallel ATA interface. But maintains register compatibility and software compatibility with Parallel ATA. AUDIO1: Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and line-out ports for easier access.
Signal Name Function AUDMIC Front Panel Microphone input signal AUDGND Ground used by Analog Audio Circuits AUDMICBIAS Microphone Power AUDVCC Filtered +5V used by Analog Audio Circuits AUDFR. Connecting I/O Devices The backplane of the motherboard has the following I/O ports: PS2 Mouse Use the upper PS/2 port to connect a PS/2 pointing device. PS2 Keyboard Use the lower PS/2 port to connect a PS/2 keyboard.
Parallel Port (LPT1) Use LPT1 to connect printers or other parallel communications devices. Chapter 3 Using BIOS About the Setup Utility The computer uses the latest Award BIOS with support for Windows Plug and Play. The CMOS chip on the motherboard contains the ROM setup instructions for configuring the motherboard BIOS. The BIOS (Basic Input and Output System) Setup Utility displays the system’s configura- tion status and provides you with options to set system parameters. Press DEL to enter SETUP Pressing the delete key accesses the BIOS Setup Utility: Phoenix-AwardBIOS CMOS Setup Utility: Standard CMOS Features Frequency/Voltage Control Advanced BIOS Features Load Fail-Safe Defaults Advanced Chipset Features Load Optimized Defaults Integrated Peripherals Set Supervisor Password Power Management Setup Set User Password Save &. Updating the BIOS You can download and install updated BIOS for this motherboard from the manufacturer’s Web site. New BIOS provides support for new peripherals, improvements in performance, or fixes for known bugs.
Install new BIOS as follows: If your motherboard has a BIOS protection jumper, change the setting to allow BIOS flashing. Standard CMOS Features This option displays basic information about your system. Phoenix-AwardBIOS CMOS Setup Utility Standard CMOS Features Date (mm:dd:yy) Mon, Nov 17 2003 Item Help Time (hh:mm:ss) 13: 4: 54 IDE Primary Master IDE Primary Slave IDE Secondary Master Menu Level IDE Secondary Slave Drive A.
If you are setting up a new hard disk drive that supports LBA mode, more than one line will appear in the parameter box. Choose the line that lists LBA for an LBA drive. IDE Primary/Secondary Master/Slave (Auto) Leave this item at Auto to enable the system to automatically detect and configure IDE devices on the channel. Advanced BIOS Features This option defines advanced information about your system. Phoenix-AwardBIOS CMOS Setup Utility Advanced BIOS Features Item Help ATA 66/100 IDE Cable Msg. Enabled Quick Power On Self Test Enabled First Boot Device Floppy Menu Level Second Boot Device HDD-0 Third Boot Device CDROM. Gate A20 Option (Fast) This item defines how the system handles legacy software that was written for an earlier generation of processors.
Leave this item at the default value. Typematic Rate Setting (Disabled) If this item is enabled, you can use the following two items to set the typematic rate and the typematic delay settings for your keyboard. Advanced Chipset Features These items define critical timing parameters of the motherboard.
You should leave the items on this page at their default values unless you are very familiar with the technical specifications of your system hardware. If you change the values incorrectly, you may introduce fatal errors or recurring instability into your system. DRAM Clock (By SPD) This item enables you to manually set the DRAM Clock. We recommend that you leave this item at the default value. DRAM Timing (Auto By SPD) Set this to the default value to enable the system to automatically set the SDRAM timing by SPD (Serial Presence Detect). AGP & P2P Bridge Control (Press Enter) Scroll to this item and press to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility AGP & P2P Bridge Control AGP Aperture Size 128M Item Help AGP Mode 4X AGP Driving Control Auto AGP Driving Value Menu Level.
VGA Share Memory Size (32M) This item allows you to select the shared memory size for VGA usage. Press to return to the Advanced Chipset Features screen. System BIOS Cacheable (Disabled) When this item is enabled, the System BIOS will be cached for faster execution. Video RAM Cacheable (Disabled) When this is enabled, the Video RAM will be cached resulting to better performance. OnChip SATA (Enabled) This option allows you enable or disable the onboard Serial ATA device. On-Chip IDE Channel 0/1 (Enabled) Use these items to enable or disable the PCI IDE channels that are integrated on the motherboard. IDE Prefetch Mode (Enabled) The onboard IDE drive interfaces supports IDE prefetching, for faster drive access.
MC97 Modem (Auto) Enables and disables the onboard modem. Disable this item if you are going to install an external modem. OnChip USB Controller (Enabled) Enable this item if you plan to use the Universal Serial Bus ports on this mainboard.
USB 2.0 Support (Enabled) Enable this item if want to use the USB 2.0. Onboard Parallel Port (378/IRQ7) This option is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel port. Parallel Port Mode (ECP) Enables you to set the data transfer protocol for your parallel port.
There are four options: SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port), and ECP+EPP. Power Management Option (User Define) This item acts like a master switch for the power-saving modes and hard disk timeouts. If this item is set to Max Saving, power-saving modes occur after a short timeout. If this item is set to Min Saving, power-saving modes occur after a longer timeout.
If the item is set to User Define, you can insert your own timeouts for the power-saving modes. IRQ/Event Activity Detect (Press Enter) Scroll to this item and press to view the following screen: Phoenix-AwardBIOS CMOS Setup Utility IRQ/Event Activity Detect Item Help OFF LPT & COM LPT/COM HDD & FDD ON Menu Level PCI Master OFF When select Pass- PowerOn by PCI Card Enabled. IRQs Activity Monitoring (Press Enter) This screen enables you to set IRQs that will resume the system from a power saving mode. Phoenix-AwardBIOS CMOS Setup Utility IRQs Activity Monitoring Primary INTR ON Item Help IRQ3 (COM2) Enabled IRQ4 (COM1) Enabled Menu Level IRQ5 (LPT2) Enabled.
Release notes: New Release Projected Bond Distances. Crystal maker crack internet.
Resources Controlled By (Auto(ESCD)) You should leave this item at the default Auto(ESCD). Under this setting, the system dynamically allocates resources to Plug and Play devices as they are required.
If you cannot get a legacy ISA (Industry Standard Architecture) expansion card to work properly, you might be able to solve the problem by changing this item to Manual, and then opening up the IRQ Resources submenu. Frequency/Voltage Control This item enables you to set the clock speed and system bus for your system. The clock speed and system bus are determined by the kind of processor you have installed in your system.
Ecs Motherboard Manual Download
Phoenix-AwardBIOS CMOS Setup Utility Frequency/Voltage Control Auto Detect PCI/DIMM Clk Enabled. Load Fail-Safe Defaults Option This option opens a dialog box that lets you install fail-safe defaults for all appropriate items in the Setup Utility: Press and then to install the defaults. Press and then to not install the defaults. Save & Exit Setup Option Highlight this item and press to save the changes that you have made in the Setup Utility and exit the Setup Utility. When the Save and Exit dialog box appears, press to save and exit, or press to return to the main menu: Exit Without Saving Highlight this item and press.
Memo Using BIOS. Chapter 4 Using the Motherboard Software About the Software CD-ROM The support software CD-ROM that is included in the motherboard package contains all the drivers and utility programs needed to properly run the bundled products. Below you can find a brief description of each software program, and the location for your motherboard version. Setup Tab Setup Click the Setup button to run the software installation program. Select from the menu which software you want to install.
Browse CD The Browse CD button is the standard Windows command that allows you to open Windows Explorer and show the contents of the support Before installing the software from Windows Explorer, look for a file named README.TXT, INSTALL.TXT or something similar. Click Next. The following screen appears: Check the box next to the items you want to install.
The default options are recommended. Click Next run the Installation Wizard. An item installation screen appears: Follow the instructions on the screen to install the items.
Drivers and software are automatically installed in sequence. Manual Installation Insert the CD in the CD-ROM drive and locate the PATH.DOC file in the root directory. This file contains the information needed to locate the drivers for your motherboard. Look for the chipset and motherboard model; then browse to the directory and path to begin installing the drivers.
Chapter 5 VIA VT8237 SATA RAID Setup Guide VIA RAID Configurations The motherboard includes a high performance Serial ATA RAID controller integrated in the VIA VT8237 Southbridge chipset. It supports RAID 0, RAID 1 and JBOD with two indepen- dent Serial ATA channels. RAID: (Redundant Array of Independent Disk Drives) use jointly several hard drives to increase data transfer rates and data security. Install the Serial ATA hard disks into the drive bays. Connect one end of the Serial ATA cable to the motherboard’s primary Serial ATA connector (SATA1).
Connect the other end of Serial ATA cable to the master Serial ATA hard disk. Connect one end of the second Serial ATA cable to the motherboard’s sec- ondary Serial ATA connector (SATA2). Create Array In the VIA RAID BIOS utility main menu, select Create Array then press the key.
Tyan S1854 Trinity 400 Motherboard Manual
The main menu items on the upper-left corner of the screen are replaced with create array menu options. RAID 0 for performance Select the second option item Array Mode, then press the. Select Start Create Process and press to setup hard disk for RAID system. The following confirmation appears: The same confirmation message appears when the Auto Setup for Performance option is selected. Press “Y” to confirm or “N” to return to the configuration options. RAID 1 for data protection Select the second option item Array Mode, then press the. Delete Array In the VIA RAID BIOS utility main menu, select Delete Array then press the key.
The focus is directed to the list of channel used for IDE RAID arrays. Press the key to select a RAID array to delete.
The following confir- mation message appears. Duplicate Critical RAID 1 Array When booting up the system, BIOS will detect if the RAID 1 array has any inconsistencies between user data and backup data. If BIOS detects any inconsistencies, the status of the disk array will be marked as critical, and BIOS will prompt the user to duplicate the RAID 1 in order to ensure the backup data consistency with the user data. Power off and Check the Failed Drive: This item turns off the computer and replaces the failed hard drive with a good one. If your computer does not support APM, you must turn off your computer manually. After replacing the hard drive, boot into BIOS and select Choose replacement drive and rebuild to rebuild the broken array.
Windows XP installation. Existing Windows XP Driver Installation Insert the ECS CD into the CD-ROM drive. The CD will auto-run and the setup screen will appear. Under the Driver tab, click on VIA SATA RAID Utility.
VIA SATA RAID utility. RAID0 and RAID1 functions Insert the ECS CD and click on the Setup to install the software.
The InstallShield Wizard will begin automatically for installation. Click on the Next button to proceed the installation in the welcoming window. Put a check mark in the check box to install the feature you want.
Then click Next button to proceed the installation. Using VIA RAID Tool Once the installation is complete, go to Start- Programs- VIA- raidtool.exe to enable VIA RAID Tool. After the software is finished installation, it will automatically started every time Windows is initiated.
The main interface is divided into two windows and the toolbar above contain the main functions. Click on these toolbar buttons to execute their specific functions. The left windowpane displays the controller and disk drives and the right windowpane displays the details of the controller or disk drives. Click on the plus (+) symbol next to Array 0-RAID 0 to see the details of each disk. You may also use the same button to view the statuses of Array 0- RAID 1.
Intel Motherboard Manual Chipset![]()
VIA VT8237 SATA RAID Setup Guide. Click on the plus (+) symbol next to Array 0; RAID 1 to see the details of each disk. VIA VT8237 SATA RAID Setup Guide.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |